|
It is currently Mon May 13, 2024 4:04 am
|
View unanswered posts | View active topics
69 Charger, A story in pictures
Author |
Message |
Khyron
Hey Hillary....ya cunt!
Joined: Fri Jul 11, 2003 11:53 am Posts: 6408 Location: Saratoga Springs NY
|
69 Charger, A story in pictures
I haven't been keeping the pic up, so I'll start the threat now that the Motor is almost built Basically she started with a wore out 360 Small block motor, She had bad bearings. After I pulled the motor and started disassembling it I found that she needed a bore real bad, also the crank was shot to hell. So I started with the full teardown.
Last edited by Khyron on Sun Apr 10, 2005 9:27 pm, edited 1 time in total.
|
Sun Apr 10, 2005 9:07 pm |
|
|
Khyron
Hey Hillary....ya cunt!
Joined: Fri Jul 11, 2003 11:53 am Posts: 6408 Location: Saratoga Springs NY
|
I started with having the block bored .030 over. A set of Keith black Pistons, A medium performance cam, and a zero deck job on the motor. She got a nice chemical bath and all the bearings from cam to crank got replaced. Set of cromemolly rings <yes, gapped correctly > I didn't take many pics, but here she is before the shop cleaned her up, you can see the years of paint are starting to get stripped off .... By me and then by the machine shop.
Attachments:
Mvc-302f.jpg [ 46.37 KiB | Viewed 9218 times ]
Mvc-303f.jpg [ 67.74 KiB | Viewed 9218 times ]
Last edited by Khyron on Sun Apr 10, 2005 9:27 pm, edited 1 time in total.
|
Sun Apr 10, 2005 9:11 pm |
|
|
Khyron
Hey Hillary....ya cunt!
Joined: Fri Jul 11, 2003 11:53 am Posts: 6408 Location: Saratoga Springs NY
|
not that everything Is back, I cleaned the block one last time, set in the crank <nice and turned .010> Cam, pistons, double roller.... time to get er done
After much conversation. I decided on the Gold, Black, and chrome look. With a black engine compartment. I think it will look great. Here she is as she sits now. The heads where just on while paint was being applied. They are getting ported and new springs, ect, ect...
Attachments:
Mvc-305f.jpg [ 164.17 KiB | Viewed 9213 times ]
MVC-307F.JPG [ 82.17 KiB | Viewed 9214 times ]
Last edited by Khyron on Sun Apr 10, 2005 9:28 pm, edited 1 time in total.
|
Sun Apr 10, 2005 9:15 pm |
|
|
Khyron
Hey Hillary....ya cunt!
Joined: Fri Jul 11, 2003 11:53 am Posts: 6408 Location: Saratoga Springs NY
|
Now, being the anal person I am, all the lettering and freeze plugs are getting painted black. I'll Most likely paint some Mopar Logos on the motor as well. The transmition has been stripped, cleaned, and sanded.
Ohh, I pulled this out of the old oil sump..... I think I know why the motor went bad. There were metal shards, glass, and plastic in the motor
more updates as I have the time and pictures
Attachments:
MVC-306F.JPG [ 116.81 KiB | Viewed 9212 times ]
Last edited by Khyron on Sun Apr 10, 2005 9:28 pm, edited 1 time in total.
|
Sun Apr 10, 2005 9:19 pm |
|
|
Khyron
Hey Hillary....ya cunt!
Joined: Fri Jul 11, 2003 11:53 am Posts: 6408 Location: Saratoga Springs NY
|
hey dutch, I was missing you as I pulled out that god damn transmition by myself, Ace had his kids this weekend
|
Sun Apr 10, 2005 9:22 pm |
|
|
Dutch
Left hand of the devil
Joined: Fri Jul 11, 2003 2:12 pm Posts: 1378 Location: In flux
|
Whew. Glad I wasn't around then. Friggin trannies.
_________________ 03 XX
The problem with America is stupidity. I''m not saying there should be capital punishment for stupidity, but why don''t we just take the safety labels off of everything and let the problem solve itself?
|
Sun Apr 10, 2005 9:39 pm |
|
|
CHARGER_FAN
Contributing Member
Joined: Fri Mar 11, 2005 3:55 pm Posts: 735 Location: Utah...SNOW BLOWS!
|
Cool, it's going back together!! The gold engine looks like something from the 007 "Goldfinger" movie...in fact, you could call your Charger Goldfinger.
Oh & I'm diggin' that new avatar! (looks vaguely familiar )
_________________
|
Mon Apr 11, 2005 5:06 pm |
|
|
Khyron
Hey Hillary....ya cunt!
Joined: Fri Jul 11, 2003 11:53 am Posts: 6408 Location: Saratoga Springs NY
|
hehe, stole it from the 1970chargerregistry, thought it needed a little more
|
Mon Apr 11, 2005 5:08 pm |
|
|
CHARGER_FAN
Contributing Member
Joined: Fri Mar 11, 2005 3:55 pm Posts: 735 Location: Utah...SNOW BLOWS!
|
I know, it actually looks better on this board anyway with the black background.
_________________
|
Mon Apr 11, 2005 5:39 pm |
|
|
maxmincher
Front Runner
Joined: Wed Apr 07, 2004 9:33 pm Posts: 1013
|
Khyron wrote: hey dutch, I was missing you as I pulled out that god damn transmition by myself, Ace had his kids this weekend
Shit man, I only live a mile away, I would have been down for the cause.
_________________ At first there were two sets of footprints in the sand
Then there were one sets of foot prints in the sand
When times get hard and shit hits the fan
God doesnt walk with me he carries me man
-50cent
|
Mon Apr 11, 2005 9:49 pm |
|
|
lee955i
The Traveling Gnome
Joined: Mon Jul 14, 2003 11:37 pm Posts: 1340 Location: Central-Oh So Sweaty- Florida
|
maxmincher wrote: Khyron wrote: hey dutch, I was missing you as I pulled out that god damn transmition by myself, Ace had his kids this weekend Shit man, I only live a mile away, I would have been down for the cause.
I think he was afraid you'd blow out reverse taking it out .
Cheers, Lee S.
_________________ RIP, DEREK....I Cry for that which was Once Strong and True! Former Forum Mod. Not sure which one, Khyron keeps changing it. 06 Triumph Sprint ST 99 Triumph Daytona 88 GSXR 50-Pitbike "Short, one-armed and pissed!..... It's a Lifestyle"
|
Mon Apr 11, 2005 10:24 pm |
|
|
UNHOLY
Blasphemy!
Joined: Fri Jul 11, 2003 2:23 pm Posts: 4333 Location: In Khyron's ass
|
oh shit ...outta left field the cranky one knocks one outta the park !
that's a true shoe to the nutz right there !
_________________ MY HATRED IS ENDLESS
|
Mon Apr 11, 2005 10:34 pm |
|
|
Khyron
Hey Hillary....ya cunt!
Joined: Fri Jul 11, 2003 11:53 am Posts: 6408 Location: Saratoga Springs NY
|
LMFAO! Thats funny on so many levels. Sorry Max. It was a spur of the moment thing on Sunday, But I did get allot done, broke the trannie mount, but thats to be expected on a car that old. only a $10 piece. I'll make sure I call you when I put the motor and trinnie back in, i'll need a hand to guide it back in.
Still short about $150 for the finishing parts, so it may be a bit.
|
Tue Apr 12, 2005 7:47 am |
|
|
Khyron
Hey Hillary....ya cunt!
Joined: Fri Jul 11, 2003 11:53 am Posts: 6408 Location: Saratoga Springs NY
|
to continue....
Finished painting the motor ... being the anal jerk I am, I decided to put a few logos on the oil pan.... When I got done with that. I mated the trannie and engine together. I figured everyone tells me this is the easy way to do it... it wasn't too bad
Attachments:
MVC-311F.JPG [ 68.61 KiB | Viewed 9160 times ]
MVC-308F.JPG [ 69.24 KiB | Viewed 9160 times ]
Last edited by Khyron on Sat Apr 16, 2005 9:12 pm, edited 1 time in total.
|
Sat Apr 16, 2005 9:05 pm |
|
|
Khyron
Hey Hillary....ya cunt!
Joined: Fri Jul 11, 2003 11:53 am Posts: 6408 Location: Saratoga Springs NY
|
and here is the engine and the nice clean engine going in her new home
|
Sat Apr 16, 2005 9:07 pm |
|
|
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|